|
|
The family house
Moudrá, Aneta ; Janíček, Vít (referee) ; Benešová, Romana (advisor)
The subject of presented thesis is preliminary design of a detached house with workshop, as a design documentation for future building construction. The building is located on sloping land in the village Litohrady and consists of a basement and one above ground floor. The workshop is located on the ground floor. Roofing is solved by warm flat roof construction with an inverted roof assembly. Vertical structure and horizontal load-bearing structures are made out of Ytong system, perimeter masonry of the basement floor is made out of concrete blocks of permanent formwork Best. Construction of the house is based on footings. The main entrance to the house is designed to be in the basement, workshop has its own separate entrance on the ground floor. In the basement there is a living area and utility room with double car garage. The ground floor of the house holds a private zone and workshop. Proposal for the house construction emphasizes the layout design, architectural and construction solutions to energy savings and safety in use.
|
|
|
Selected parts of the construction-technology plan - kindergarten in Brno
Bartek, Petr ; Doubek, Rostislav (referee) ; Motyčka, Vít (advisor)
This thesis deals with a construction-technology plan of two-story nursery school in Brno, district Bystrc. Thesis contains engineering report, financial and time schedule for structures, project of construction site, noise study, technological notes and inspection and test plans for cast-in-place reinforced concrete slabs and for prestressed concrete Spiroll floor slabs, formwork study, list of main machines used during construction, time schedule, needed quantity of workers and itemized budged for carcass, budged for whole building and comparison of cranes. Moreover, in appendices are drawings of approaches and processes during construction in its different phases.
|
|
|
Fire Station
Herman, Tomáš ; Havířová, Zdeňka (referee) ; Lavický, Miloš (advisor)
Processed topic of final thesis is fire station type P in Brno - Líšeň. Object is composed from three parts, main building, garage for fire vehicles and garage for other vehicles. Main entrance and exits from the garages are situated on southeast. Garages are single-storey, main building has two floors. Object has a pitched roofs with metal roofing. Foundations are from concrete and reinforced concrete. Structural system is partly masonry and partly reinforced concrete frame.
|
|
| |
|
|
Production hall with facilities
Malec, Pavel ; Vítámvás, Zdeněk (referee) ; Utíkalová, Ivana (advisor)
The subject of my thesis is to elaborate the project documentation for construction execution of an administrative building with added production hall which is found in the town Benešov near Prague. The object of the administrative building has one underground and free above-ground floors. The underground floor serves for operating purposes connected with production. The first above-ground floor serves for staff catering. On the second above-ground floor we can find social rooms, dressing rooms and washrooms for employees. Offices can be found on the last third above-ground floor. Vertical supporting constructions on the underground floor are made of blocks filled with concrete i.e. 300 mm. On the above-ground floors rhere are vertical supporting constructions which are made by walled technology from ceramic Therm blocks i.e. 300 mm. Vertical constructions partially consist of precast wall panels and partially of monolytic panels i.e. 250 mm. The roof is designed as a flat green area. During the design processing the impact was put on increased comfort for using and overall modern concept of the object.
|
|
|
Building - technology phase: Implementation of superstructure of a single - family house
Šimoníková, Kristýna ; Liška, Pavel (referee) ; Nečasová, Barbora (advisor)
Bachelor´s thesis deals with selected stages of upper superstructure, as are walling and ceiling processes. Object is designed in two constructional variants. Porotherm system and Ytong system were selected and compared. Technological regulations, budgets, time schedules, principles of construction organization and other essentials for ensuring the smooth construction execution were studied. This thesis´s goal is to review selected variants in terms of time, economic, technology demands and thermal properties. Subsequent evaluation could serve families who intend renovation of their house as a guide in the selection of structural system.
|
|
|
Mixed-use Building
Vlado, Roman ; Havířová, Zdeňka (referee) ; Lavický, Miloš (advisor)
Annotation The aim of the thesis is new-building design of mixed-use building in cadastral of community Nové Mesto nad Váhom. Building is situated at free estate in the marginal of community. Building estate must have new feeder road built. In front of building will be the parking area. The mixed-use building is detached and four-storied building. At basement is situated underground garage for ten cars and store houses for flats. At first floor is situated cafe and commercial space. Cafe has kitchen, stock rooms and WC. Commercial space has staff facilities and sales area. One of the shops has back door to stock room. Parking space for staff is next to building. At second and third floor is situated eight flats. Four flats has 3 rooms and four left has 2 rooms. Each flat has got stock room, WC and bathroom. In each flat is situated entrance to the terrace. Terrace is on extensive green roof orientated to southwest. In the flats is kitchen together with living room because of bigger space. Floor in the flats is combination of ceramic tiles and laminated floor. Area with flats has a lift. Concrete foundations are on micropiles. Project is set up with system LIVETHERM building has heat cladding. At the building are plastic windows and colour is matching with facade. Foothpath around building are from interlocking pavement. Whole documentation is prepared to realization of building. Drawing documentation is prepared by software AUTOCAD.
|
|
|
Fire Station
Hořák, Michal ; Jelínek, Petr (referee) ; Struhala, Karel (advisor)
The diploma thesis includes a new building of the fire department. The building is located in Valašské Klobouky, along Brumovská street. The main entrances to the buildings are oriented to the west. It is a two-storey building, in part a basement. The construction system is bricked. The object is covered with a flat and sloping roof.
|
|
|
Production hall with facilities
Malec, Pavel ; Vítámvás, Zdeněk (referee) ; Utíkalová, Ivana (advisor)
The subject of my thesis is to elaborate the project documentation for construction execution of an administrative building with added production hall which is found in the town Benešov near Prague. The object of the administrative building has one underground and free above-ground floors. The underground floor serves for operating purposes connected with production. The first above-ground floor serves for staff catering. On the second above-ground floor we can find social rooms, dressing rooms and washrooms for employees. Offices can be found on the last third above-ground floor. Vertical supporting constructions on the underground floor are made of blocks filled with concrete i.e. 300 mm. On the above-ground floors rhere are vertical supporting constructions which are made by walled technology from ceramic Therm blocks i.e. 300 mm. Vertical constructions partially consist of precast wall panels and partially of monolytic panels i.e. 250 mm. The roof is designed as a flat green area. During the design processing the impact was put on increased comfort for using and overall modern concept of the object.
|
|
|
Selected parts of the construction-technology plan - kindergarten in Brno
Bartek, Petr ; Doubek, Rostislav (referee) ; Motyčka, Vít (advisor)
This thesis deals with a construction-technology plan of two-story nursery school in Brno, district Bystrc. Thesis contains engineering report, financial and time schedule for structures, project of construction site, noise study, technological notes and inspection and test plans for cast-in-place reinforced concrete slabs and for prestressed concrete Spiroll floor slabs, formwork study, list of main machines used during construction, time schedule, needed quantity of workers and itemized budged for carcass, budged for whole building and comparison of cranes. Moreover, in appendices are drawings of approaches and processes during construction in its different phases.
|
guest ::
